Bodhi High Vape Pen Battery Use Guide
- ONE (1) button click to engage power and vaporize the cartridge contents!
- TWO (2) button clicks will preheat the contents of the cartridge; simply let this cycle to the end (indicated by color cycling) or press the button to begin vaporization
- THREE (3) button clicks will select the variable voltage as follows:
—— Red is 4.0 Volts, Blue is 3.8 Volts, Green is 3.6 Volts
—— We highly recommend the Green setting as it will prolong the battery life and reduce the heat used to vaporize the contents of the cartridge
- FIVE (5) button clicks will turn on the the pen’s battery power, five clicks again to turn off.
If battery is fully discharged the voltage will drop below where it can be charged and the LED will flash but the pen will no longer work. Please especially note that the LED will flash and auto power off if you hold the button to draw current for longer than 8 seconds, this is to prevent overheat!
Fully discharging your battery may harm it until it eventually appears to be dead (once it reaches a point below 2.5v it will no longer charge with our chargers)! It is much better to do a partial discharge as this reduces stress and prolongs battery life. Please remember that elevated temperature and high currents affect battery cycle life. Also, Lithium-ion batteries suffer from stress when exposed to heat, as does keeping a cell at a high charge voltage.
We highly encourage you to please take care of your Batteries!